近期论文 |
1, Li Wang, Luyan Wang, Zongdong Hao, Weizhe Tang, Rui Dou*，Microstructure and properties of silicon nitride ceramics fabricated by vat photopolymerization in combination with pressureless sintering, Ceramics International,2023（影响因子: 5.2，中科院一区） 2,Li Wang, Yang Jiao, Lian Yao, Weizhe Tang, Rui Dou*，Effect of sintering temperature and low-temperature aging on microstructure and flexural strength of Fe2O3-doped 3Y-TZP ceramics fabricated by stereolithography-based additive manufacturing, Ceramics International, 2023, Volume 49, 37307（影响因子: 5.2，中科院一区）
3,Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing, Ceramics International, 2023, Volume 49, 17174（影响因子: 5.2，中科院一区） 4,Weizhe Tang, Tong Zhao*, Rui Dou*, Li Wang*, Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration. Additive Manufacturing, 2022, Volume 59, 103168（影响因子: 11.0，中科院一区）
5,Rui Dou*, Weizhe Tang, Kaixin Hu f*, Li Wang*, Ceramic paste for space stereolithography 3D printing technology in microgravity environment. Journal of the European Ceramic Society, 2022, Volume 42, 3968（影响因子: 6.364，中科院一区）
6,Weizhe Tang, Tong Zhao*, Rui Dou*, Li Wang*, Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting. Ceramics International, 2022, Volume 48, 15218（影响因子: 5.2，中科院一区）
7,W Duan, S Li, G Wang, R Dou*, et al. Thermal conductivities and mechanical properties of AlN ceramics fabricated by three dimensional printing. Journal of the European Ceramic Society, 2020, Volume 40, Issue 10, 3535-3540（影响因子: 6.364，中科院一区）
8,L Wang, X Liu, G Wang, W Tang, S Li, W Duan, R Dou*, et al. Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing. Materials Science and Engineering: A, 2020, Volume 770, 138537（影响因子: 6.044，中科院一区） 9,X Yang, X Zhao, C Wang, Z Liu, R Dou*, et al. Superstretchable and processable silicone elastomers by digital light processing 3D printing. ACS Appl. Mater. Interfaces, 2019, 11, 15, 14391–14398（影响因子: 10.383，中科院一区） 10,R Dou, WZ Tang, et al. Sintering of lunar regolith structures fabricated via digital light processing. Ceramics International, 2019, Volume 45, Issue 14, 17210-17215（影响因子: 5.2，中科院一区）
11,M Liu, W Tang, W Duan, S Li, R Dou*, et al. Digital light processing of lunar regolith structures with high mechanical properties. Ceramics International, 2019, Volume 45, Issue 5, 5829-5836（影响因子: 5.2，中科院一区）
12,S Li, T Zhao, W Han, L Wang, R Dou*, et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology. Journal of the European Ceramic Society, 2018, Volume 38, Issue 14, 4597-4603（影响因子: 6.364，中科院一区）
13,L Wang, R Dou*, et al. A case study of mechanical properties of perovskite-structured Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ oxygen transport membrane. Journal of the European Ceramic Society, 2018, 38(2): 647-653（影响因子: 6.364，中科院一区） |
