钱善华

职称

教授/博导

职务

机械工程学院副院长

联系方式

E-mail: qiansh@jiangnan.edu.cn or qianjnwx@126.com

Phone: 13665160156

Address:无锡市滨湖区蠡湖大道1800号江南大学机械工程学院

教育背景

1) 2019.12-2020.12阿尔伯塔大学，工学院，访问学者

2) 2009.07-2011.09清华大学，摩擦学国家重点实验室，博士后/助理研究员

3) 2008.08-2008.10利兹大学，机械工程学院，Visiting Research Student

4) 2006.09-2009.06中国矿业大学，机械设计及理论专业，博士

5) 2003.09-2006.06中国矿业大学，测试计量技术及仪器专业，硕士

6) 1999.09-2003.06中国矿业大学，测控技术与仪器专业，学士

学术兼职

1)中国机械工程学会摩擦学分会委员、江苏省机械工程学会摩擦学分会副主任、无锡市机械工程学会常务理事等

2) Friction青年编委、材料保护编委、Tribology of Frontiers in Mechanical Engineering的Review Editor等

3) Tribology International、Langmuir、Journal of Texture Studies和摩擦学学报等期刊审稿人

研究方向

1)仿生设计及结构优化

2)软材料制备及表面调控

3)高端装备界面科学与技术

在研项目

国家自然科学基金“非牛顿流体食品在口咽腔软湿界面的滑移机制与输运特性研究”(52375184)、省重点实验室开放基金(FMZ202204、202022AWCX13)和企业委托项目等10项。

学术成果与奖励

自2003年9月至今，一直从事仿生设计、高端装备界面科学与技术等研究，主持国家自然科学基金、江苏省自然科学基金、中国博士后科学基金、国家/省部级重点实验室开放基金和企业委托技术开发等30余项。

在Tribology International、Langmuir、Journal of Bionic Engineering、Chinese Science Bulletin、Tribology Letters、Journal of Tribology-Transactions of The ASME、Journal of Engineering Tribology、Polymer Testing、Polymer International、Journal of Applied Polymer Science、Journal of Texture Studies、Journal of Materials Science-Materials in Medicine、Industrial Lubrication and Tribology、摩擦学学报、工程力学、中国机械工程、中国表面工程和表面技术等国内外期刊上发表论文60余篇，申报发明专利20项，授权美国发明专利2项、中国发明专利15项和软件著作权5项。

曾获江苏省科学技术二等奖、中国商业联合会科学技术一等奖、全国青年摩擦学与表面保护学术会议优秀论文奖和“德骼拜尔”杯优秀论文奖等。

近期成果

1)国家自然科学基金“非牛顿流体食品在口咽腔软湿界面的滑移机制与输运特性研究”(52375184)、重点实验室开放基金“食品先进制造装备中摩擦学关键基础问题及其应用研究(FMZ202204)”、“卷烟抽吸过程中口腔涩感评定方法研究(202022AWCX13)”等。

2) Food Swallowing Simulating Device、Link motion-based food swallowing simulator、一种卷烟主流烟气口腔仿生吸收装置、一种粘性流体混合搅拌的机械装置、一种模拟食物吞咽的机械装置、一种润滑材料粘附性能对比的测量装置及应用、基于等效厚度体积模量的软材料变形表征方法及其应用、一种鞋底耐磨能力测试装置及应用、一种基于丙烯酸类聚合和光固化的亲水涂层及其制备方法、一种基于非连续性润湿性改良的聚二甲基硅氧烷制备方法及产品、一种食品级润滑脂及其应用、一种食品级润滑脂及其制备方法、一种自动封装装置、一种可模拟多种环境下的鞋底耐磨能力测试装置等授权发明专利。

3)面向口腔环境下的舌上颚曲线特征点提取系统、面向软体摩擦副的往复滑动测试数据分析系统、面向电机振动的多路数据采集分析系统、基于相对光干涉法的润滑剂相对膜厚的测量系统、基于BP神经网络的润滑油配方优化GUI测试平台等软件著作权。

近期论文

[1]Weiwei Chen, Bo Xu, Qichen Tang, Shanhua Qian*, Da Bian, Hui Li*. Preparation and properties of PDMS surface coating for ultra-low friction characteristics[J].Langmuir, 2023, 39(41): 14605-14615

[2]Qichen Tang, Shanhua Qian*, Weiwei Chen, Xiaofei Song, Jianfeng Huang. Preparation and characterization of temperature-responsive Ca-alginate/poly(N-isopropylacrylamide) hydrogel.Polymer International, 2023, 72(2): 252-262.

[3]Deke Ma, Shanhua Qian*, Shuaishuai Zhou, Da Bian.Fabrication and characterization of polyelectrolyte coatings by polymerization and co-deposition of acrylic acid using the dopamine in weak acid solution.Langmuir,2022, 38, 33, 10256-10264

[4]Shanhua Qian,Yue Wu,Zhiyong Wang,Cheng Zhang,Jianfeng Huang,Jinghu Yu. Bionic design of the oral swallowing in vitro and its application in the dysphagia.Journal of Texture studies, 2022, 53(4): 430-443

[5]Shuaishuai Zhou, Shanhua Qian*, Wei Wang, Zifeng Ni, Jinghu Yu.Fabrication of a hydrophilic low-friction poly(hydroxyethyl methacrylate)coating on silicon rubber.Langmuir, 2021,37, 45, 13493–13500

[6]Wei Wang, Shanhua Qian*, LongfeiGong, Zifeng Ni, Haidong Ren. Effects ofcarbon nano onionson the tribological performance of food-gradecalcium sulfonate complex grease.Lubrication Science, 2021, 33(8): 460-470

[7]Longfei Gong, Shanhua Qian*, Wei Wang, Zifeng Ni, Lei Tang. Influence of nano-additives (nano-PTFE and nano-CaCO3) on tribological properties of food-grade aluminum-based grease.Tribology International, 2021, 160: 107014

[8]Zhi Liu, Shanhua Qian*, Qichen Tang, Shuai Cheng, Jinghu Yu. Instantaneous volume modulus and its application in the human tongue using the in-situ strength measurement method.Polymer Testing, 2021,97: 107157

[9]Shanhua Qian, Shuai Cheng, Zhi Liu, Feifei Xu, Jinghu Yu. A rapid method to evaluate the chocolate smoothness based on the tribological measurement.Journal of Texture studies, 2020, 51(6): 882-890

[10]Shanhua Qian, Shuai Cheng, Zifeng Ni, Jinghu Yu, Jun Zhang. Influence of silane-modified coconut shell powder on thermal and mechanical properties of thermoplastic elastomers[J].Polymer International, 2020, 69(6): 571-576

[11] Shuai Cheng, Shanhua Qian*, Chuanhui Huang, Zifeng Ni, Liguo Liu. Elastic modulus of thermoplastic elastomers investigated by instantaneous volumetric strain method.Journal of Applied Polymer Science, 2019, 47181: 1-7

[12] Shanhua Qian, Liguo Liu, Zifeng Ni, Yong Luo. Experimental investigation of the dynamic properties of natural cartilage under reciprocating sliding at two typical rubbing pairs.Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2019, 233(9): 1318-1326

[13] Shanhua Qian, Di Wang, Shuai Cheng, Zifeng Ni, Yongwu Zhao. The viscoelastic response of soft material: a theoretical and experimental study based on barreling deformation.Polymer Testing, 2018, 70: 474-480

[14] Hongyue Wang, Shanhua Qian*, Zifeng Ni, Chuanghui Huang, Yongwu Zhao. Experimental investigation on the rheological properties of the castor oil at different temperatures.Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2018, 232(7): 861-870

[15] Shanhua Qian, LiYong Zhang, Zifeng Ni, Chuanhui Huang, Dekun Zhang. Investigation of contact characteristics and frictional properties of natural articular cartilage at two different surface configurations.Journal of Materials Science: Materials in Medicine, 2017, 28(84): 1-11

[16]Shanhua Qian, Xuliang Chen, Liguo Liu, Qingzhong Li. Tribological properties of the castor oil affected by the additive of the ionic liquid [HMIM]BF₄.Journal of Tribology-Transactions of the ASME, 2016, 138(1): 014501-014501-5